Try Updoot Free

Go beyond spreadsheets, try Updoot

← Back to BlogThe best managers are checking this before their first coffee.Check this before coffeeShow me
Operations

What Is Job Costing Software? Costs, Overhead and Job Profit Explained

See your whole business on one page. Time, projects, sales and budgets in one pulse you can check before your first coffee.

14 days free. No credit card needed. Cancel anytime.

What is job costing software comparing estimated and actual labor, materials and overhead to show job profit
Know someone who'd benefit from this? Send it their way LinkedIn Facebook

Quick Answer

Job costing software is software that collects every cost connected to a specific job (labor hours, materials, equipment, subcontractors, mileage and a share of overhead) and compares it with the estimate and the price, so you know what each job actually cost and whether it made money. It pulls labor from time tracked to the job, materials from purchases coded to the job and billing from invoices, and it shows estimate vs actual while the job is still running, not weeks after it ends.

Job costing software exists to answer one question, did this job make money, so start with the free Job Profitability Calculator below. Enter the price, your estimate and the actual costs for labor, materials, equipment, subcontractors and other direct costs, add your overhead rate, and it shows estimated vs actual profit, margin and which cost category drove the difference. Then keep reading to learn what job costing software is, which costs it tracks, how overhead gets assigned to jobs, how data flows into it, how it tracks jobs in progress and which reports matter most.

Many service businesses know their total profit for the year but not which jobs created it. The result is a pricing problem hiding inside the averages: some jobs carry the business while others quietly lose money, and nobody can tell which is which until the bank account shows it.

Free Job Profitability Calculator

Use one job at a time. Enter the contract price or final invoice total, then the estimated and actual amounts for each cost category. Overhead is applied as a percentage of direct costs; if you do not know your rate, the section on overhead below explains how to estimate it. Print the result or copy it into Excel or Google Sheets.

Job Profitability Calculator

Enter the price, estimate and actual costs. Results update as you type.

Job and Price

Estimate vs Actual

Cost CategoryEstimatedActualVariance
Labor hours0
Loaded labor rate ($/hr)0
Materials ($)0
Equipment and rentals ($)0
Subcontractors ($)0
Mileage, permits and other direct ($)0

Job Results

Estimated Profit$0Margin
Actual Profit$0Margin
Profit Variance$0Actual minus estimated
Break-Even Labor Hours0At actual rate and other costs

Planning tool only. This is a management estimate, not an accounting or tax calculation. Your accountant may allocate overhead and recognize revenue differently.

What Is Job Costing Software?

Job costing software is a system that treats each job, project or work order as its own small profit center. Every cost that can be tied to the job is recorded against it, and the software compares those costs with what you estimated and what you charged. The result is a running profit picture for each job, plus a history you can use to price the next one.

Job costing is common in construction and the trades, but it applies to any business that does distinct jobs for customers: landscaping, cleaning contracts, IT projects, agencies, event companies, manufacturers that build to order and repair shops. If two jobs can cost very different amounts to deliver, job costing tells you why.

Job costing software is different from accounting software, although the two work together. Accounting software keeps the books for the whole business and produces financial statements. Job costing software, or the job costing features inside an operations platform, collects the detail by job while the work is happening. Many businesses keep their accounting software and use job costing data to make day-to-day operating decisions.

The Costs Job Costing Software Tracks

Costs on a job fall into two groups: direct costs that can be traced to the job and indirect costs, or overhead, that support all jobs.

Cost TypeExamplesWhere the Data Comes From
Direct laborHours worked on the job times a loaded labor rateTime clock entries coded to the job
MaterialsLumber, parts, supplies, inventory usedPurchase orders, receipts and inventory issued to the job
EquipmentRentals, fuel, hourly charges for owned equipmentRental invoices, equipment logs
SubcontractorsSpecialty trades or outside servicesSubcontractor invoices coded to the job
Other direct costsMileage, permits, disposal fees, travelMileage logs tied to time cards, expense entries
OverheadOffice rent, admin salaries, insurance, software, vehiclesApplied using an overhead rate

The loaded labor rate is worth a note. It is not just the hourly wage. It includes employer payroll taxes, workers' compensation, benefits and paid time off, so it reflects what an hour of labor really costs. Using the base wage alone makes every job look more profitable than it is.

How Overhead Gets Assigned to Jobs

Overhead cannot be traced to one job, but every job has to help pay for it. Job costing software assigns overhead with an overhead rate. The three most common methods are:

Whichever method you choose, use it consistently and update the rate at least once a year. A job that looks profitable before overhead can lose money after it, and that is often the job you are underpricing every time.

How Data Flows Into Job Costing Software

Job costing only works if costs are coded to the right job when they happen. That makes the data flow more important than the reports.

Labor from the time clock

Employees choose the job, and often a cost code for the type of work, when they clock in or switch tasks. Approved hours flow into the job at the loaded rate. This is the single biggest source of job cost data for most service businesses, and the most common source of error when it is done on paper at the end of the week.

Materials from purchasing

Purchase orders and receipts are coded to the job when they are created or approved. Materials pulled from stock are issued to the job.

Mileage and expenses

Mileage logged with time cards and expenses submitted with receipts are tagged to the job.

Revenue from billing

Estimates, change orders and invoices tie revenue to the job so profit can be calculated against what was actually billed.

For more on setting up cost codes, see Job Cost Codes.

Tracking Jobs While They Are Still Running

The real value of job costing software is catching problems in the middle of a job, when you can still act. Two simple measures do most of the work.

Percent of budget used vs percent complete. If a job is 40 percent complete but has used 65 percent of its labor budget, it is heading over. Catching that at 40 percent leaves time to change the crew, talk to the customer about scope or issue a change order.

Estimated cost to complete. Remaining budget is not the same as remaining cost. Good job costing compares the cost so far plus a fresh estimate of what is left against the price, so the projected final profit stays realistic.

Larger contractors also track work in progress for accounting and bonding purposes, including whether they have billed ahead of or behind the work completed. Those calculations are usually handled with an accountant. For most small businesses, a weekly look at budget used, percent complete and projected profit on every open job is enough to prevent most surprises.

Job Costing Reports That Matter Most

ReportWhat It ShowsDecision It Supports
Job profit and marginPrice minus total cost, and profit as a percentage of priceWhich jobs and job types to pursue
Estimate vs actual by categoryVariance for labor, materials, equipment and subsWhere estimates need to change
Labor hours vs budgetHours used against hours estimatedCrew sizing and scheduling
Open job statusBudget used, percent complete and projected profit for active jobsWhere to intervene this week
Profit by customer or job typeMargins grouped by customer, service or crewPricing, sales focus and training

Signs You Need Job Costing Software

Example: A Remodeling Contractor Finds Its Losing Job Type

A remodeling contractor with 14 field employees priced bathrooms and kitchens using the same labor assumptions. Annual profit was fine, so nobody questioned it. After a season of coding time and purchases to each job, the job costing reports told a different story. Kitchens averaged a healthy margin, but bathrooms ran about 20 percent over their labor estimates, mostly because of tile work and waiting on plumbing inspections. After overhead, the average bathroom barely broke even.

The contractor raised bathroom labor estimates, added a separate line for inspection delays and started reviewing open jobs every Monday by comparing percent complete with budget used. The next season, bathroom margins moved close to kitchen margins, and two jobs that started running over were caught early enough to issue change orders.

Final Thoughts

Job costing software turns each job into its own profit picture. It collects labor from the time clock, materials from purchasing, mileage and expenses, and overhead through a consistent rate, then compares actual cost with estimate and price while there is still time to act. Use the calculator above on your last few jobs, and look for a system where costs are coded to the job at the moment they happen.

Job Costing in Updoot

Updoot connects the data job costing depends on. Employees clock in to jobs and projects with the employee time clock, mileage is logged with time cards, purchase orders run through approvals, and budgets and invoices live in the same app. Approved hours also flow to your payroll provider through payroll-ready reports.

See the Updoot pricing page for current plans, and start a free trial with your crew.

For informational purposes only. This article and the job profitability calculator are management tools, not accounting, tax or legal advice. Revenue recognition, overhead allocation and tax treatment can differ for financial statements. Consult your accountant for your situation.

Sources

Related Reading

How to Track Labor Costs by Job: A Simple Job Costing Guide →

Job Cost Codes: How to Set Up Cost Codes for Time Tracking →

Labor Cost Percentage Calculator (Formula and Examples) →

Frequently Asked Questions

What is job costing software? ▶
Job costing software collects every cost tied to a specific job, including labor, materials, equipment, subcontractors, mileage and a share of overhead, and compares it with the estimate and the price to show what each job actually cost and earned.
What costs are included in job costing? ▶
Job costing includes direct costs such as labor at a loaded rate, materials, equipment, subcontractors and other direct costs like mileage and permits, plus a share of overhead applied with an overhead rate.
What is a loaded labor rate? ▶
A loaded labor rate is the full cost of an hour of labor, including the wage plus employer payroll taxes, workers' compensation, benefits and paid time off. Using only the base wage makes jobs look more profitable than they are.
How is overhead assigned to jobs? ▶
Overhead is usually assigned with a rate based on direct costs, direct labor hours or revenue. For example, if annual overhead is 150,000 dollars and annual direct costs are 1,000,000 dollars, the overhead rate is 15 percent of direct costs.
Is job costing software the same as accounting software? ▶
No. Accounting software keeps the books for the whole business. Job costing software or job costing features collect detail by job while work is happening. Many businesses use both together.
How do you know a job is going over budget? ▶
Compare the percent of budget used with the percent of the job completed. If a job is 40 percent complete but has used 65 percent of its labor budget, it is likely to run over unless something changes.
Which businesses use job costing? ▶
Construction and trades use it most, but it fits any business that delivers distinct jobs, including landscaping, cleaning contracts, IT projects, agencies, event companies, repair shops and build-to-order manufacturers.
Does Updoot support job costing? ▶
Updoot connects the data job costing needs: time clocked to jobs and projects, mileage logged with time cards, purchase orders with approvals, budgets and invoices, plus payroll-ready reports for your payroll provider.

See your whole business on one page

Time, projects, sales and budgets in one pulse you can check before your first coffee.

14 days free. No credit card needed. Cancel anytime.